沃辛顿LS6000有一款入门级自动控制的液氮供给系统LS6000AT，沃辛顿液氮罐在2016年后推出一款LS6000-CS，在此我们对比两款的异同点。

控制功能项	CS100控制器	AUTO-TEND
产品图片
控制面板	有	有
自动灌充	有	有
灌充开关显示	有	有
高温报警	有
低温报警	有	有
远程报警	有
传感器感应失败报警	有
报警失效提示	有
**遥控调试	有
液氮供给中断报警	有
加电自检报警	有
热电偶校准报警	有
开盖时间过长报警	有
2通道网络线数据接口	有
接电脑/记录/打印	有
温度控制	有
数据自动储存记录	有
手动除雾	有
自动除雾	有

为了确保LS系列的正确运行和保持优良性能，CS100应遵循常规的维护计划。这将包括以下内容：

Display Brightness  LS SERIES V0.5 Firmware SER 12345 Serial Number

To ensure proper operation and maintain excellent performance of the LS SERIES, a regular maintenance schedule should be followed for the CS100. This would include the following: 

CS100控制系统

检查是否暴露于湿气、磨损、连接器问题和面板或按钮损坏。此外，定期固件更新可能是重要的。

CS100 CONTROL SYSTEM 

Examine for exposure to moisture, wear and tear, connector problems, and damage to the faceplate or buttons. In addition, periodic firmware updates may be important.

电磁阀

检查电线和连接器是否损坏。每2年更换一次。液位传感器总成，检查电线和连接器的损坏情况。更换每2年热电偶组件检查损坏电线和连接器。

Solenoid Valve 

Examine wires and connector for damage. Replace every 2 years. Level Sensor Assembly 

Examine for damage to wires and connector. Replace every 2 years  Thermocouple Assembly Examine for damage to wires and connector

电源

对电源和电源线损坏的检查

此外，还应对冷冻机及其机械部件进行检查和预防性维护。详情请参阅业主手册。

Power Supply 

Examine for damage to power supply and power cords

In addition, inspection and preventive maintenance should also be performed on the freezer and its mechanical parts. Refer to owner’s manual for details. 

如果观察到或怀疑冷冻系统的任何间歇操作，即使在正常维护计划之外，也应立即进行调查和补救。

如果LS系列液氮罐出现问题或出现效率不高的情况，请供应商寻求帮助。CS100已纳入*诊断工具，以协助识别和纠正可能出现的任何问题。

If any intermittent operation with the Cryostorage System is observed or suspected, it should be investigated and remedied immediay even if this falls outside of the normal maintenance schedule。

If the LS SERIES freezer experiences problems or appears that it is not operating at optimum efficiency, please contact your supplier for assistance. The CS100 has incorporated state of the art diagnostic tools to assist in the identification and correction of any issues that may arise。